| Customization: | Available |
|---|---|
| Warranty: | 12 Months O 1000 Hours |
| Type: | Basic Diesel Generator |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Diesel Genset Features P.F=0.8 3Phase | ||||||||||
| Generating Set Performance | 50Hz | |||||||||
| Service | P.R.P | Standby | ||||||||
| Rated output | kVA | 400 | 438 | |||||||
| Active power output | kW | 320 | 350 | |||||||
| Rated Speed | r.p.m | 1500 | ||||||||
| Standard Voltage | V | 400/230 | ||||||||
| Voltage available | V | 380/220 - 415/240 | ||||||||
| Perforemance data refer to Standard Reference Conditions of ISO 8528:+25ºC,100m ALT,relative humidity 30% | ||||||||||
| Power reduction acc.to DIN ISO 3046 Standard values:Above 100m ALT approx.1% per 100m.Above 25ºC(77ºF) approx.4% per 10ºC(50ºF). | ||||||||||
| Considering cos phi=0.8 | ||||||||||
| Prime Mover Performance 1500 r.p.m | ||||||||||
| SERVICE | P.R.P | Standby | ||||||||
| Rated output | KW | 358 | 392 | |||||||
| Manufacturer | Cummins | |||||||||
| 4 stroke Diesel Engine - Injection type | Direct | |||||||||
| Aspiration type | Turbocharged&Charge Air Cooled | |||||||||
| Cylinders,number and arrangement | 6-L | |||||||||
| Bore×Stroke | mm | 140X152 | ||||||||
| Total Displacement | L | 14 | ||||||||
| Cooling system | Water | |||||||||
| Emission Certification | STG IIIA, NRMM 3 | |||||||||
| Compression ratio | 16.3:1 | |||||||||
| Specific fuel consumption(P.R.P) | L/h | 87,3 | ||||||||
| Specific oil consumption(at full load) | % | <0.1 | ||||||||
| Total coolant capacity | L | 69 | ||||||||
| Fuel System | Type | CELECT(EUP) | ||||||||
| P.R.P. Prime Power - ISO 8528:PRIME POWER is the maximum power available during a variable power sequence, which may be run for an unlimited number of hours per year, between stated maintenance intervals.The permissible average power output during a 24 hours period shall not exceed 80% of the prime power.10% overload available for governing purposes only. | ||||||||||
| Max Standby power -ISO 3046 Fuel Stop power:Power available for use at variable loads for limited annual time (500h), within the following limits of maximum operating time: 100% load 25h per year ,90% load 200h per year. No overload available. Applicable in case of failure of the main in areas of reliable electrical network. | ||||||||||
| Synchronous Generator GTL | ||||||||||
| Model | K320G4 | |||||||||
| Poles | num | 4 | ||||||||
| Winding Conections (standard) | Star-serie | |||||||||
| Insulation | class | H | ||||||||
| Enclosure(according to IEC-34-5) | IP23 | |||||||||
| Phases | 3+N | |||||||||
| Votage Regulators | A.V.R (SX440) | |||||||||
| Steady voltage precision | within±1.0% from no load to full loading with cosΦ=0.8-1.0 | |||||||||
| Alternator used by GTL Gensets meet the requirements of following Standard:BS5000,VDE0530,NEMA MG1-32,IEC34,CA C22.2-100,AS1359 | ||||||||||
| Generationg Set Installation Data 1500 r.p.m | ||||||||||
| EXHAUST SYSTEM | ||||||||||
| Exhaust Gas Temperature at full load | ºC | 489 | ||||||||
| ºF | 912,2 | |||||||||
| Exhaust gas flow | Kg/h | 2062 | ||||||||
| Maximum allowed back pressure | Kpa | 10 | ||||||||
| AIR REQUIREMENT | ||||||||||
| Air requirement for combustion at 100% load/rated speed | L/s | 474 | ||||||||
| ft3/min(CFM) | 1003,8 | |||||||||
| ELECTRIC STARTING SYSTEM | ||||||||||
| Starting motor output | kw | N.A | ||||||||
| Minimum Recommended Battery Capacity-Cold Soak @ 0 °F (-18 °C) | CCA | 900 | ||||||||
| Auxiliary voltage | V | 24 | ||||||||
| LUBRICATION SYSTEM | ||||||||||
| Lube oil system including sump,filters,etc. | L | 38,6 | ||||||||
| Cold Start Capability | ||||||||||
| Minimum Ambient Temp for Unaided Cold Start | °F (°C) | 10.4(-12) | ||||||||
){kind=link}